Plywood for cabinets

What is the best type of plywood for kitchen cabinets? What size plywood should you use to build cabinets? For cabinet doors , a plywood face can give you a finished look, regardless of the type of plywood you’ve chosen to use for the box construction. Columbia’s Appalachian Traditions line the need for the edge-glued lumber or “plank-matched” look perfectly.

Shop plywood and a variety of building supplies products online at Lowes. Plywood cabinet boxes are lighter than particle board boxes. This makes them easier to install for wall cabinets , where high lifting is required. Plywood is an extremely versatile form of wood for making cabinets. It is tough, cuts easily, and you can get huge sections of it.

Moreover, you can shape plywood , and it also takes paint very well. However, the limitations of plywood make solid wood a favored choice for cabinets. Most lumberyards stock veneer-core plywood , a cabinet staple for years. These panels are made by laying up layers, or plies, of wood so that the grain direction in each ply runs at right angles to the one next to it.

Cross-grain construction is what gives plywood its strength and dimensional stability. In cabinetmaking , you refer to veneer core if you want material manufactured similar to construction plywood. The inner cores of veneer-core plywood are much thicker than true veneer.

Cherry, Maple, Ash, Hickory and Oak. Wood species such as hickory, maple or. Birch , Beech and White or Red Oak. Walnut and Mahogany. Spruce , Pine and Fir Softwoods.

NOTE: I mentioned earlier that I made my DIY kitchen cabinets overall size ¼” wide. Cabinet Grade Plywood. I cut my base cabinet sides 36” long because I was going to have a thin countertop. Plywood thicknesses vary, though, so make certain your material thickness measures a true ⁄ , or adjust your part dimensions to achieve the final cabinet width.

Poplar wood (Image: Associated Fabrication ) Over the years, poplar was the preferred choice of wood for painted cabinets. Alder wood (Image: Liga Eglite ) Although alder also takes paint well, it has a high rate of absorption. The cabinets that you build are only as good as the materials you build them with. It can be used for a wide variety of applications including some cabinet components, furniture and much more. High-quality 11-ply plywoo including veneer, is used in this custom-cabinet drawer.

Some home centers carry a similar product, called “classic birch. For bathrooms, a Luan plywood is good to put on top of decking plywood for protection. Marine plywood is good for things that need to withstand water like boats. The best plywood for cabinets is decorative plywood and can also be used to make furniture.

Create circular saw cutting guides for plywood. I actually used the plywood to make center panels for some paint-grade cabinet doors. The plywood is that good a quality that it can be used for that. The one side is primed and the other side has marks to help nail the plywood down if you want to use it in the underlayment mode.

Finding the number of sheets of plywood needed for a floor, wall, ceiling, or cabinet begins with finding the area that needs to be covered. Area can be found by multiplying the length and width of the space in feet. Find the square footage of each space and add together to find the total square footage needed. Need a home makeover?

Furniture and accents for every room.