Behr cleaner and etcher

This prep product is also great for removing rust and red clay stains. This product will clean your concrete surfaces and ensure penetration and adhesions of paints, stains and sealers. TIP: For your safety, please wear protective clothing, eye goggles, and acid-resistant rubber gloves and footwear. Designed to clean and etch bare concrete and masonry surfaces to improve penetration and adhesion of paints, stains and sealers. Do not let product dry on the surface.

Rinse surface thoroughly with fresh water while scrubbing at the same time to properly remove all remaining residue. This biodegradable stripper is ideal for removing multiple coats of paint, stain, epoxy, sealant and most industrial coatings. Ideal for decks, fences and siding. Removes exterior stains caused by mol mildew, algae and fungus. Concrete Etch and Cleaner is a cleaner and etch combination that opens the pores of concrete surfaces to allow coatings to penetrate and achieve a proper bond.

A true alternative to muriatic aci it creates the same profile but without the dangerous chemicals, harsh odors and need to neutralize after etching. Spread the cleaner and etcher using a stiff bristle non-metal brush or broom. Ensure the product does not dry on the surface. Biodegradable with easy water clean-up. Multi-purpose biodegradable 2-in-cleaner and etcher formulated to remove grease, oil, auto fluids, rust and red clay stains, from concrete and masonry surfaces.

Behr manufactures a spectrum of specialized and highly rated products designed to protect and enhance the look of many floor types. From concrete sealers, stains and finishes to porch and driveway coatings, Behr delivers advanced protection for your home’s toughest surfaces. This easy water clean-up product is safe for use indoors or outdoors and can be used full strength for tough stains or diluted for general cleaning. After applying to concrete use a stiff bristled broom, scrubbing the solution into the surface until foaming action stops. Etch galvanized metal with a concrete and masonry cleaner and etcher.

All-In-One Wood Cleaner. Application Blank space if empty. Products in this Consumer Product Information Database (CPID) are classified based on their composition: Substances: single chemicals. Preparations: products which contain chemicals that can be easily separated during normal use. Follow all label instructions.

For best , use a plastic watering can or plastic pump sprayer to evenly distribute product. Click here for step by step instructions from Behr explaining how to clean and etch a concrete surface. After the surface is preppe you are ready to stain the surface! Remove efflorescence with a mixed solution of one part vinegar and one part water, rinse thoroughly with clean water and allow to dry. Two gallons of Behr Premium Decorative Concrete Dye in Arctic Black.

One gallon of Behr Premium Low-Lustre Sealer. Four paint rollers. Using water only to wash the garage or driveway floor might not work because the stain, dirt is composed by oil, bacteria and other hydrophobic chemicals. Just pour it onto a dampened surface, scrub lightly and wash it away.

Cleans out surface pores and adds profile for better bond. Stir primer thoroughly before and occasionally during application. Remove mildew stains with a mildew stain removing product.

On galvanized metal, use a diluted solution of a product such as BEHR PREMIUM NO. The etcher uses Muriatic acid which is a strong chemical. If you get any on your skin, your skin will become rough. And it does work really well.

If concrete has any kind of prior coating, than it is best to use No. It is only for bare concrete. Use a product such as BEHR PREMIUM NO.