Repair textured ceiling

What is the best way to repair a textured ceiling? How to patch a hole in a textured ceiling? Prepare the Surface. Scrape around the cracks with a putty knife, and use a paintbrush to clean off any dust. Be sure to wear safety glasses when cleaning the ceiling.

Fix large cracks with joint compound before you use the textured patching compound. Start by spraying the perimeter, then fill in the middle. Avoid heavy buildup—you can always add more. If your spray-textured ceiling is just dingy or staine you can renew it with a coat each of sealer and paint.

But if the texture is falling off or missing in spots, you’ll have to reapply texture to fix the problem. Some of it was just water stains, but the ceiling texture wasn’t chipping or falling. In those cases, it was as easy as using an aerosol sealer like my favorite from Kilz. Repairing a damaged textured ceiling starts with replacing the damaged drywall underneath the texture.

By the DIY experts of The Family Handyman Magazine. You might also like: TBD. Use an oscillating tool or a hand-held scraper to scrape the ceiling. Apply drywall compound to fill small holes, or use a drywall patch to fix larger drywall holes.

Need a quick home makeover? Find Textured Ceiling at Target. Try Drive Up, Pick Up, or Same Day Delivery. Free 2-day Shipping On Millions of Items.

Shake the can of texture for a couple of minutes, and then screw the nozzle onto the valve stem. Squeeze the trigger with quick half-second bursts while sweeping the can over the damaged area. Allow the texture to dry for hours before painting. Weiler Painting specializes in texture matching with popcorn and stucco ceilings of various finishes. If you have any questions or need a professional repair job, don’t hesitate to give me a call.

Fasten as many screws as needed to the ceiling to secure the plaster to the lath (Image 1). Use a drywall compound and a putty knife to spread a thick layer of mud over the screws (Image 2), after it is dry put on another coat. Mud the other patches and repaired areas with the drywall compound. Sand down any excess drywall compound and then prime. Actual costs will depend on job size, conditions, and options.

Rub away any uneven surfaces or remaining edges. This will help you even out the texture before you repair it. This also helps create a rough surface for the drywall to adhere to. Pour fine silica sand into the disposable bowl with the joint compound and mix them together.

Sand the area around the ceiling crack to. Scoop some onto the. First I applied the joint compound with my knockdown texture sponge. When I redid my husbands office last year, I wanted to remove texture from the ceiling. Popcorn ceilings make rooms look so dated!

The original idea was to hide the imperfections of the ceiling , which makes sense. However, all the little bumps and ridges from the texture create shadows that make the ceiling seem lower and darker. Secure the drywall to the ceiling joists using drywall screws.

The screws should just dimple the drywall rather than breaking all the way through the surface. Apply a thin layer of joint compound over the joints and drywall screws, and apply a piece of drywall tape to the wet joint compound.