Sanding popcorn ceiling

What is the best way to repair a popcorn ceiling? How do you replace a popcorn ceiling? What to do after removing a popcorn ceiling? The way that popcorn ceilings are normally handled (and the way that I have removed mine) is by scraping them down.

There are tons of videos on about this. The general process is to get a pump-up garden sprayer and spray the ceiling with water until it is damp. Hold the mud pan just below the area you are scraping and the scrapings fall directly into the pan. We had seen tools that had a putty knife with a piece to attach a garbage bag.

In our opinion this is not a viable option with wetting the ceiling as the weight of the scrapings would get too heavy. Now that you removed the popcorn texture, you can start prepping the new surface for a fresh coat of paint. Proceed as you would for any project. Fill any imperfections as needed.

After you apply a quality coat of primer, you’re ready to paint. Popcorn ceiling —If you have a heavily textured ceiling and just don’t like the look, you have a few options. With unpainted texture, the most common approach is to mist it with a spray bottle and scrape off the softened texture.

Removing popcorn ceiling that way makes a big, sloppy mess and almost always leaves you with repairs to do afterward. Only give it a light misting—too much water could damage the drywall or loosen the joint tape. He just used a simple sprayer like what you’d spray your yard for weeds.

Free 2-day Shipping On Millions of Items. However we have some divots and uneven areas. Do we need to compound the whole ceiling or just fill the imperfections? This is the order we were recommended: 1. Wipe down with sponge 4. Sand uneven areas 3. Yes you can sand it, but if you want it gone the easiest way is to mist the texture with a sprayer and wait for it to soak in then use a trowel or flat drywall blade and scrape the popcorn off.

A painters drop on the floor will catch all the waste. This idea may be a bit more expensive, but will ensure a good end result. Cover the Surface With Plasterboard Step 1. Screw or nail the panels into place.

Be sure the screws are long enough to fit through the new wall board as. With painted texture, some pros scrape as best they can and then ‘skim coat’ the entire ceiling with a thin layer of joint compound. Scraping dry texture is a dusty mess, and skim coating requires some practice.

House sold first week on market. It does make a difference. Oh yes, sand the ceiling after you get the popcorn off before applying texture or paint or it will look lumpy. Light sanding with a palm sander is enough.

Harbor Freight has palm sanders for $15. Remember that finishing the ceiling after popcorn removal will be of the utmost importance with this method. You may have to fill gouges, tape the seams, and sand the ceiling to create the ideal surface for a new coat of paint.

Painting your ceiling should be done in a two-step process. It’s the little brother to popcorn texture that was popular on 60s- and 70s-era ceilings. Unlike popcorn, which is sprayed-in-place using specialized equipment, stipple is applied by dipping an applicator in drywall compoun sticking it to the ceiling, and pulling it away to create a pattern of pointy stalactites.

The Best Traditional Tools for Popcorn Ceiling Removal Even with updated and enhanced tools, one cannot do away with the traditional tools in all things home projects. For popcorn removal, there are the conventional tools that you can always trust like the sprayer, scraper, drywall joint compound and putty knife, sander, paint and roller, light, and a fan. Shake a spray can of popcorn ceiling texture for the amount of time recommended by the manufacturer.