How to install a deadbolt lock

How do I unlock a deadbolt without a key? How to install a deadbolt correctly? Drill the cylinder hole. Other articles from familyhandyman.

After the hole saw’s pilot bit pokes through the opposite side, remove the scrap wood protector and finish drilling the cylinder hole from the exterior side. Install the deadbolt lock about inches above the bottom of the door. You’ll have to adjust the. Choose a position on the door for the lock. Affix the template to the door.

Mark the center of the holes for both the lock cylinder and latchbolt. Most deadbolt-lock manufacturers provide a template to help you install the lock. The template is designed to. After you mark the reference points from the template, use a hole saw to begin cutting the hole for the deadbolt. Insert dead bolt into edge hole and mark its outline.

Chisel out mortise for dead bolt. Screw dead bolt mechanism to door, with keyed cylinder on the outside and turn lever on inside. To prevent splintering in a wood door, drill halfway through one side, and then flip the door and drill through the other side.

Mark end of dead bolt with felt-tip pen. If your template does not encase both sides of the door, drill a pilot hole first. Get the peace of mind you want with this added security.

See the right tools and tips you'll need to get this task done quickly and correctly. Free 2-day Shipping On Millions of Items. Calling a locksmith out for this how to install a deadbolt lock job will cost $1or more, but you can install a heavy-duty deadbolt yourself in less than an hour for a third of the price. To cut through a steel door, make sure you get a “bimetal” hole saw set. That’s about average for a good deadbolt and a hole saw set.

Remove the deadbolt from its packaging and take out the instruction sheet with the template for marking the holes on. The screws that hold the deadbolt into the door should be at least three inches long. The bolt in the deadlock should fit all the way into the jamb hole in the doorframe. Mark the deadbolt centerline on the door edge at the desired height, using a tape measure and pencil.

Align the hole with one of the center lines marked on the door face and bore until the pilot bit of the hole saw penetrates the opposite door side. Insert the new bolt into the opening on the edge of the door and fasten it to the door with the provided screws. Fold the layout template supplied with the Kwikset deadbolt on the door edge line and position it.

Insert the exterior part of the lock into the door by feeding the long metal piece through the opening in the center of. If the deadbolt comes with an interior plate and a decorative. Decide where to install the deadbolt on the door.

Place one of the deadbolt plates on the door to figure out exactly where it should be positioned. Trace the circumference of the plate with a pencil on both sides of the door. Remove the plate and place a dot in the center of the circle on both sides of the door.

Some drill kits include a jig and router bit you can use with a drill to simplify this step. Attach the jig to the door and guide the router bit in the channels. Take off the jig and use a chisel to remove the excess material.

A secure entry starts with a solid door and a Grade or Grade deadbolt with a solid 1-in. Buying a Deadbolt”). Any exterior door that only has a lock in the doorknob isn’t secure.

A sturdy screwdriver or small pry bar can quickly bow the doorjamb enough to release the latch. Check your existing deadbolt.