How to hang a bat house

You have an actual HOUSE for your bats? Most players keep them in a locker or closet. Or maybe even a duffel bag. So where do your mitts reside - a nice little condo? Secure it directly to the trunk with one stainless - screw.

Using a stainless screw will not damage the tree. Pick a tree that is at the outside edge of the wooded area, but no direct afternoon sun. It is so versatile, ive used it for a lot of things in my house. When to install a bat house?

Where to put a bat house in your yard? How high do I have to hang a bat house off the ground? Next, measure the width of the bat house and cut pieces of wood at that length to create mounting brackets. There are two ways to mount or hang a bat house.

You can either hang the home on a post or on your home. Either way, do not put the house anywhere near tree branches. Tree branches make it easy for predators to attack the bats. For most users, a post-mounted bat house is ideal. Choose a sunny location on the East or South facing side of your house.

Bat houses work best with at least 6-hours of direct sunlight (if only partial day sun is available- morning sun is preferable). Use adhesive caulk to attach the rails. Allow the extra rail length to stick out on both sides. Tree and post mounted bat houses should have the rails oriented so that the length protrudes from the top and bottom. Secure the mounting rails to the bat house using wood screws.

Find the location on your home that fits the criteria above. If the house has side vents, make sure that they are left clear for proper ventilation. Single chamber houses usually do not work well on poles unless you mount two of them back to back. Measure up at least 15- feet from the ground. Bat houses should be mounted in an area that gets 6-hours of direct sunlight (facing either East or South).

All bat houses must be airtight around the roof. Now swing the bat house up, GET HELP! If you are going to use plastic mesh to help the bats climb inside your bat house , now is the time when you would staple it on. Make sure it hangs all the way down to the landing pad area so bats have something to grab on to. Before adding the side pieces, apply caulk.

This seals the bat house to help keep the heat inside. Steps When Hanging A Bat House 1. Prepare The Moun​ting Brackets. To mount a bat house, you will need brackets that will allow you to attach it to the. After you have made the brackets, the next step is to attach it to the bat house. To attach the Bat House to the Pole, I used three pieces of Pipe-Straps.

Drill Screw Holes To. I used the Self-Tapping Metal Screws to attach the straps to the pole, then the wood-screws to attach the straps to the Bat House. If your home can meet all the conditions laid out above, then mounting the bat house on your home isn’t a bad idea.

However, most homes aren’t perfectly situated to attract bats. Thus, other options should be considered. Most people find mounting their bat house on two 20” posts to be ideal. Each Triple Cell Bat House weights approximately pounds and without the Easy-up Bracket attachment you will most likely need a piece of equipment or scaffolding to set up your bat houses.

Install the bat box a minimum of feet off the ground. Make sure the box will get some sun. Bats like a warm climate. NOTE: If you worry that your bat box will not get enough sun, paint it with non-toxic black paint so that the sun it does get is more easily absorbed. Do not paint the inside of the house.

Ensure that ventilation slots of the bat house are not obstructed. Height: To effectively attract bats to bat houses, mount the bat house at a height of at least feet, and a maximum of feet. Tips for Maintaining You Bat House Airtight seams. Inspect the bat house interior using a spotlight. If bats are present, wait until later in the season to do routine maintenance.

Once during each winter the bat house should be inspected carefully for broken seams. Build your bat house so that approximately inches of roughened wood extends from the bottom on the back of the bat house. This allows the bats to land and climb up into their roosting chamber.

Add a vent to each side and a small slit vent to the front of the house to allow air flow. This prevents the bat house from overheating. While many houses are mounted on buildings, multi-chambered bat houses can be mounted back to back on a pole to ensure a steady temperature inside the box.