Total Tech Support members get their TV Mounted for $49. Save on services today. Agents are ready to help. Home theater advice. How to hang TV with no wires showing?
Get a mount made for the weight of your TV. There are many different. Method of 3: Mounting Your TV on Studs. Mark studs on your wall where you plan to hang the TV. Use your stud finder.
Mark lightly in pencil where the corners of the TV will be and remove the paper. Measure the distance between the top and bottom holes on each TV mounting arm. Mark two points in the center of each.
Loosen, push, tighten: Take the TV off the wall, loosen the bolts holding the arms on the back of the TV , then push. Improvise: If you used up all of the wiggle room available. You’ll need to screw the TV mount into wall studs for maximum holding power—if you just mount it to the drywall , you’re sure to cause a lot of damage, since drywall isn’t actually that strong. Get a stud finder and use it to locate the studs behind the drywall.
What is the load limit for inch drywall and how many screws and how close apart they can be put to car. Screw the two mounting arms (vertical brackets) from the kit to the back of the TV , then secure the mounting arms to the provided wall plate as if completing wall mount assembly. If you’re going to need a swiveling mount , make sure you know beforehand. Conversely, if you think you’d prefer a more stable mount, make sure that your ports are suitably situated before drilling into your wall. You will need extra help to lift, and properly mount your TV to the wall mount.
Up to Off Top Selling Brands. Day Free Shipping On Thousands of Products! Wall-mounted Tv For Less, At Your Doorstep Faster Than Ever! Temporarily attach the TV wall mount to the bracket on the back of the TV.
Measure from the bottom of the TV to the bottom of the wall mount so your TV will hang at the desired level. Pull the anchor against the back of the drywall with the pull tool, then screw the TV mounting bracket to it. Flat screen TVs are heavy, and the bracket that holds them must be securely mounted to the wall. Step 2: Purchase your television mounting hardware.
Measure your TV , check the back fittings, and begin to research which hardware works best for your needs. Amazon is a great resource to search for affordable mounting hardware. As a professional home theater installer, I’ve used toggles many times and never had a TV fall off the wall. Once you know what tv mount you want to use the next step is to locate your studs, because you’ll want to make sure you’re anchoring the TV into the studs, not just empty drywall.
We had a little advantage here as we built from the ground up, so we were able to place and mark the studs as we built. It comes with templates that you trace on your wall in between studs. Cut out the drywall with a jab saw, drop the wires, connect them up and plug it in.
Took me all of about an hour to install including cleanup and mounting. Highly recommended. See pics to see how clean the setup is. Unlike wood studs where you can simply drive lag bolts or screws straight into the 2×studs, metal studs are hallow and have thin walls.
Do not attempt to use drywall anchors to hang it. No wall on which to hang your TV ? Consider installing a half height room divide to hold your TV set. The home pictured here topped off the room divider with some internal windows to allow natural light to flow between two spaces.
No comments:
Post a Comment
Note: only a member of this blog may post a comment.