What wood should I use to make exterior shutters? How to build exterior wooden shutters? Go ahead and cut all of your boards to length on a miter saw, and then make any rips that you need to accommodate the width of your window.
After the boards are cut, you’ll need to cut at least two battens for each shutter. You can use three battens for each shutter too, but two per shutter is most common. I have wanted to build new shutters for a couple of years. I finally talked my husband into “helping” me and I love them.
Step 3) Using that measurement, cut a 1×cedar board for the top and one for the bottom. Step 2) Lay the boards side by side and measure the total width of the boards. Design and plan your shutters.
At this point you need to paint the edges of all the vertical boards. Lay out all your boards on saw horses and apply the primer with a roller. Each window will require two shutter assemblies and each shutter assembly consists of.
Make sure you cover all. Create a jig for consistent. Decorative Plastic Hinges First, cut boards (three for each panel) the length of the window (mine was inches tall). Without any practice at all, Steve whipped out this minute video tutorial with complete.
Steve, the assistant manager, was helping us make the shutters , and I put him on the spot and asked him if I could video him making one of the shutters.