How to build a spiral staircase

Take the original full-size instructions and scale them down. Divide the measurements by (not angles) and there you go. How do you measure for a spiral staircase? How much does a spiral staircase cost?

How can I create spiral stairs? How to build stairs in few simple steps? Many spiral staircase kits have a railing that is delivered in the form of a tight coil. With your partner, widen the coil until it is the diameter of your spiral staircase.

Then, slowly walk away from each other to draw out the railing so that it forms a corkscrew. Purchase a railing that is specifically designed for a spiral staircase. Install the railing as directed. Spiral staircases offer attractive way to access a tight space.

If we add the width of two 26-inch steps, a center column and a handrail, we find that a 62-inch diameter is a minimum for any spiral staircase. I chose a 70-inch diameter to make the stairway easier to walk. The most important part of stair building is the measuring. It is the one thing that you.

Please register here and ask our technical team for more advice, and to access more information on how to build a spiral staircase. Step - Construct Treads. You’ll find lots of information on stair building and special techniques for building curved parts. Music: Navajo Night by Audionautix is licensed under a Creative Commons Attribution license. The three main components of the spiral staircase design are: the center post (which bears the weight of everything) the risers (which sit in the post) and the treads (the actual steps that attach to the risers).

Thisdivision in spacers needing to be 5. Develop a spiral staircase layout with the obtained details. Draw a rough sketch on where the entry step starts. When drawing manually, it is better to start from the landing platform in a downward movement.

Or choose any stair calculator available on the web. Below shown is a spiral staircase design. With Paragon Stairs , spiral staircase treads come as a tread and cuff combination, and the cuff (or collar) slides right over the center column and rotates to whatever position you want. After the treads you install the balusters. The number of balusters will depend on if your stair follows spiral staircase building code or not.

To see more of our special offers on wooden spiral. This is a spiral design and is easy to build. Note that the first two stairs descend before starting the spiral.

This allows significantly more headroom as the stairs wind underneath. Screw the stair onto the bolt until the stair comes in. These staircases are constructed on a three inch (internal diameter) steel pipe. Between each tread there are short pieces ofthree and one half inch (internal diameter) pipe which are also slipped over the center pole pipe.

Don’t cut it down to length just yet. In our example, you would need to mark it at 7. Modify the top of the stringer to. Check out this video to learn how to install a rail-to-rail connection.