Board and batten shutters diy

What wood should I use to make exterior shutters? How to build exterior wooden shutters? Design and plan your shutters. Each window will require two shutter assemblies and each shutter assembly consists of. Lay out all your boards on saw horses and apply the primer with a roller.

Make sure you cover all. Create a jig for consistent. DIY Board and Batten Window Shutters Wood (cedar or pine work fine) – 1″X 6″ boards.

How To Build Board and Batten Shutters …YAY, I’m excited to share this DIY with you! I have wanted to build new shutters for a couple of years. I finally talked my husband into “helping” me and I love them. Our shutters are 60″ and the battens are set 10″ in from the top and bottom.

Some board and batten style shutters have three battens including one in the middle. We didn’t do this but if you like the look of it, you can easily make an extra batten ! Install the screws that hold it into place. On stucco buildings, it is usually a leg bolt used for installation rather than a few wood screws. We used MinWax Dark Walnut. Adding shutters made our house a little more polished and cozy.

After a few admirers of our humble farmstead suggested we put up shutters , Jack and I were determined to make it a reality. Whenever possible, we try to do our own woodwork to avoid the cost of buying materials and to add a personalized touch to the house. Official Exterior Shutters Site.

Low Price Guarantee. Go ahead and cut all of your boards to length on a miter saw, and then make any rips that you need to accommodate the width of your window. After the boards are cut, you’ll need to cut at least two battens for each shutter.

You can use three battens for each shutter too, but two per shutter is most common. Far more than window treatments, they lend curb appeal to your entire exterior. Best of all, they’re something you can do tomorrow. Or today, if you’re extra motivated.

Step 2) Lay the boards side by side and measure the total width of the boards. Step 3) Using that measurement, cut a 1×cedar board for the top and one for the bottom. These cedar board and batten shutters are easy enough for the beginning DIYer. This is an Easy DIY to add dramatic character to you outside curb appeal.

Board and batten , or board - and - batten siding, describes a type of exterior siding or interior paneling that has alternating wide boards and narrow wooden strips, called battens. The boards are usually (but not always) foot wide. Unique to Ply Gem, the Board and Batten shutters feature an innovative hidden fastener, providing visual appeal with a special batten that slides to hide the screws.

Free 2-day Shipping On Millions of Items. For our DIY Cedar Board and Batten Shutters, our cost came to approximately $40. Using pine, you can get the cost down to about $18. Add some wood glue on the outside board and lay your batten across the boards using your marked line as a guide. Clamp the batten to the board and use the nail gun to nail the board down.

Best thing, these shutters are not expensive. Probably the oldest style of shutter still used today, board and batten shutters are often associated with Swiss chalets and rustic farmhouses. We offer the traditional styles of board and batten shutters with gaps between the boards as well as without gaps where the boards are joined by tongue and groove.

Polaris Shutters Are An Effortless Way To Increase Your Home’s Curb Appeal.