Wipe on varnish

How to apply wiping varnish? What is the best way to apply varnish? Begin by sanding your project thoroughly. Step 2: Clean Your Project.

Using a shop vacuum, thoroughly vacuum all surfaces of your project to ensure no dust. You can easily make your own. A wiping varnish is nothing more than a varnish that’s been diluted with mineral spirits. The resulting runny mixture can be applied with nothing more than a clean rag.

It’s almost as easy to work with as an oil finish and just about as durable as a built-up varnish. Allow overnight drying after each coat and sand between each coat to remove dust nibs. By the way, the title is still available on DVD or digitally via The Guild.

Wiping varnishes include a resin varnish with the oil, and give a faster build-up of a harder finish. With so many wipe-on finishes to choose from, you’ll probably find one you like right off the shelf. But you can easily mix your own.

More oil increases penetration and color, and slows drying. Wipe on smooth thin coats, overlapping the previous stroke with each pass by about half. This method will result in a super smooth finish with no bubbles and no brush strokes. But remember, you will need to apply twice as many coats to get to your desired film thickness. Shop Everything A Woodworker Needs, All At Great Prices And Under One Roof!

Get Same Day Shipping And A 90-Day Guarantee. Shop Top Woodworking Products Now! Wipe - on finishes do not protect well from abrasion and lots of wet, but when the finishes are damage the repairs are quick and easy. Wipe down several square feet of the area to be varnished with the tack cloth.

Place one of the T-shirt pads into the “do” bowl and let it soak up a supply of thinned varnish. Press the pad into the empty bowl to squeeze out excess. The face of the pad should have an even, wet look without drips or thick glossy areas. Dip your rag into the finish, squeeze out the excess and wipe on.

With the lid in place, the poly will remain fresh for a couple days. After a few days, the solvent will begin to degrade the plastic, so don’t use plastic for long-term storage. Another reason to make your own wiping varnish is that there’s basically nothing to it. My recipe simply calls for two parts varnish and three parts mineral spirits (paint thinner), by volume.

I combine the two in a glass jar and then stir until the color is consistent. The directions said 3- but after 3-it looked like coat of regular poly. So, keep piling on the coats until you see the finish you want. Now this many coats of satin finish can make the finish look very mirky. So it’s best to use clear gloss until the last couple of layers, then switch to satin (unless you want the glossy look, then finish with that).

When applying a finish with a brush or roller you may notice some bubbles pop up. Many times these will settle out as the finish dries. Also, shaking a can of finish will certainly add bubbles, so try stirring instead.