How to refinish stairs

How to finish your stairs? This stuff smells so bad. Wear safety goggles and disposable gloves. Make sure stairs (and walls) are vacuumed and wiped down to remove the.

Whether you are looking for step-by-step instructions on how to refinish carpeted stairs , how to remodel stairs on a budget, or how to retread basement stairs yourself, you have come to the right place! Tutorial Pull any nails sticking out. Remove any trim work where the risers and treads meet. Rebuild any broken stairs or landings.

Sand the treads with grit sand paper with the orbital sander, this will take the wood down to the raw finish. Vacuum in between sandings. Take a block sander. And it was quite the project.

First, put a disposable latex glove on your dominant han then put a kitchen glove over it, and then put a sock over that. All you do is dip your socked hand into the stain and wipe it on the wood. Which I’ll tell you about right this very minute.

Add the iron balusters. See how to do that right here ! Stain the railings. To refinish stairs safely, you will need a respirator, goggles, and earplugs.

It is best to hook up a shop vac to your belt sander so it collects all the dust when sanding down the stairs. In our case (see what I did there?), this was vastly easier said than done. So very many holes from the staples that held the carpet runner.

Unsubscribe from Game of Life? DIYTyler 173views. Then I taped everything in preparation for painting…. I then did two coats of primer on the risers, trim and spindles.

After that, I did two coats of paint. A well-maintained painted staircase can serve as a focal point in your home. I started by cleaning up the two stair treads leading to the kitchen (right after the landing). I removed small nails and staples with pliers. I then used my belt sander with 50-grit sandpaper to basically remove everything quickly and efficiently.

I wish we were going on a classic road trip, complete with car-dancing, crazy wind-blown hair and more Mike-and-Ikes than one digestive system is equipped to handle, but it’s not that kind of trip: we’re headed down memory lane, buds. Free 2-day Shipping On Millions of Items. Sand down with grit sandpaper, then 1or 1grit sandpaper then finish with 2grit.

Clean it all up, and there will be a big mess everywhere! Remove all the loose dirt, then wash the stairs with hot water and a little dish soap added. Let the stairs dry for a couple of days without using them, then sand. Open areas could be done with a 5″ random orbit sander using a 180-grit disk. For corners and hard-to-reach places you’ll need a power tool called a detail sander.

If you like the look of basement, you don’t have to cover up your stairs at all. Instea try painting or staining or stain your existing stairs to give them a like-new appearance. First, though, it’s important to sand the stairs down and get them very clean. The next step is to remove the existing finish off the hardwood stairs by stripping it using a. A stair railing and banister add dramatic elements to a home, but over time wear and tear begin to show.

The first step in refinishing or painting a wood stair railing is to strip off the old. Another option to remove the old. You’ll see the rest of the series at the bottom of this post. We spent hours sanding our stairs !