Lsl beam

It’s strong, straight and ideal for a variety of applications. Provides a one-piece beam solution that reduces installation time. All three variations offer several advantages over typical milled lumber: the beams are stronger, straighter, and more uniform.

They are much less likely than conventional lumber to warp, twist, bow, or shrink. LSL boards range up to 5. A deeper beam with less plies will almost always be cheaper than a wider, shallower beam. Laminated veneer lumber (LVL) is an engineered wood product that uses multiple layers of thin wood assembled with adhesives. It is typically used for headers, beams, rimboar and edge-forming material.

When your project requires a strong beam, use Versa-Lam LVL. Recycled plastic lumber. These are oriented for maximum strength and glued together into foot by foot “billets using a steam-injection process which was patented by MacMillan Bloedel. Lsl Beams at Architectural Depot. There are no knots, splits or voids.

This Rim Board also makes an excellent stair stringer blank for interior application. Combined with an adhesive, the strands are oriented and formed into a large mat or billet and pressed. LSLs are used routinely as headers above windows and doors within wood frame walls.

Actual stamps shown. The product is stamped with its grade information. In addition to being flat and straight, engineered studs are strong. These strands are oriented and pressed together to make strong, structural material for use as beams, headers, wall framing and rim boards. It is manufactured from a mix of sustainably harvested aspen and maple hardwood strands blended with an isocyanate adhesive and formed through a steam injection press.

LP SolidStart Beams SolidStart Beams are used in remodels, new construction and even on manufactured homes. They’re made to stand the test of time and reduce waste along the way, first in our manufacturing facility and later on your job site. Like notches, holes in an LVL beam reduce the net section of the beam at the hole location and introduce stress con-centrations.

This causes a reduction in the beam capacity. For this reason, horizontal holes in LVL are limited in size and location to maintain the structural integrity of the beam. No holes in cantilevers. LSL, larger holes can be drilled through the beam. THD hangers with widths greater than can have one flange inverted with no load reduction.

Specify left (L) or (R) flange. Weyerhaeuser is your source for residential, multi-family and light commercial projects. We provide seamless building solutions, all the way from design to installation to support.

Engineered lumber, including i-joists, Parallam and laminated veneer lumber, are the products of choice for builders who are looking to improve the strength and stability of the homes they build. When used properly, some of these materials can also provide points needed for National Green Building Certification. The Power Preserved Glulam beams come in full framing widths and I-Joist compatible (IJC) depths treated for exterior above ground use only. Can these be used as exterior deck beams , or do they have a product that would work outside? Asked by: Steve Microllam 1. Microllam is a brand name for Laminated Veneer Lumber (LVL) Beams manufactured by Weyerhaeuser.

They're very stable and they resist warping, splitting and shr. Laminated Veneer Lumber is most commonly used as beams and joists in framing buildings. LVL beams work well in applications all over the house. Its tensile strength makes it good for door and window headers, stair stringers, ridge beams, cantilevered roof supports and other beams.

The stiffness of a beam determines how much deflection a beam will experience under a given load. They are treated and dried only at Weyerhaeuser-authorized treatment facilities. Treated beam and header products are suitable for exposed exterior applications such as decks, pavilions, and pool enclosures.

Beams of more than one ply must be fastened together with either nails or bolts.